Getting to know: Antumbra Lite

Those with an eagle eye, may have seen the new AntumbraLite lighting control panel on the Dynalite.org site.

The newly announced AntumbraLite sets new standards for functionality and aesthetic appeal within the market.

Responding to market requests, particularly from the hospitality industry, for a more cost effective user interface, AntumbraLite is engineered to deliver focused features while retaining the Antumbra look and feel.

AntumbraLite reuses AntumbraButton’s mechanical parts without the networking components has resulted in a cost-effective addition to the control market. It is intended for use with Dynalite load controllers that have dry contact inputs. 

Available in the full range of Antumbra button and rim finishes, AntrumbraLite also supports customized button labelling with text or icons to suit any application.

I will provide more information as it becomes available.

Specification Sheet
Installation Instructions

Applications

Each AntumbraLite can send six dry contact signals out. Each of these must be wired to a compatible load controller that supports dry contact inputs, such as the DDRC-GRMS-E (18 dry contact inputs), DDMC802 (8 dry contact inputs), and DDRC810DT-GL (8 dry contact inputs).

If required, additional user interfaces can be connected using a dry contact input device such as the DDMIDC8DPMI940-DALI, and DLLI8I8O. Each of these devices can respond directly to dry contact inputs, or forward them as network messages for the system to then execute the requested function.

The AntumbraLite panel can also be used with a DPMI940-DALI and used as a DALI user interface.

We are currently exploring other applications for the AntumbraLite that could be beneficial, and will provide updates as we find them.

This series of articles from my Dynalite page focuses on products from the Philips Dynalite networked lighting control portfolio. Many industry professionals regard Philips Dynalite as being the world’s best lighting control system, that I have represented with Lightmoves for many years. SimonLakey

Getting to know: Philips Dynalite Antumbra Button

The Philips Dynalite AntumbraButton user interface consists of easy to press mechanical buttons that can be customized with text or icons and incorporates the latest in field effect technology. The contemporary design features a number of button configurations, with each button capable of local or site-wide control functions. 

  • Field effect technology – The user interface detects an approaching user and ‘wakes up’, initiating a wall-wash lighting effect to encourage interaction.
  • Supplied as two components – The Application Module contains buttons, rim, base and mounting plate, which can be mixed and matched to suit décor. The Communication Module contains all of the logical and network functions and is pre-programmed off-site, allowing commissioning to commence prior to finish options being finalized.
  • Hidden sensory inputs – An internal light sensor measures ambient light and adjusts lightwash effect accordingly. A built-in temperature sensor automatically adjusts air conditioning when integrated into the system.
  • Multiple language and icon labeling – Button labeling language choices include English, Chinese and Arabic. A library of common icons transcends language barriers, which is particularly useful in hospitality applications.
  • Selection of rim and fascia options – Allows décor matching to suit any environment.

Specification Sheet
Installation Instructions

Button configurations

 For The Australian market, the Antumbra Button series is available with three different button configurations; 2/4/6 buttons. The base button application module is the same on all models, with the buttons easily attached and removed if required.

  • PA2BPA
  • PA4BPA
  • PA6BPA

Product codes

When ordering, there is a suffix added to the standard product code that specifies finish options:

  • Button finish
  • Rim finish
  • Labelling

Button colour/finish

Antumbra is now available with a range of finishes, to suit any decor. The traditional plastic (polycarbonate) button finishes are now complimented by a range of stunning metallic finishes. 

Polycarbonate finishes (Plastic)
W = White
S = Silver
M = Magnesium

Metallic finishes
A = Aluminium
G = Gold
J = Jet
N = Noir
P = Prestige
V = Vintage

Rim finish

The Antumbra range can be ordered with a mix of rim finishes to compliment the button finish. Rims are plastic, with the aluminium and chrome being a metallic look, rather than being metal.

W = White
A = Aluminium
C = Chrome
M = Magnesium

Custom labelling

Custom labelling has always been a feature of Dynalite user interfaces. I recommend and encourage all user interfaces to be labelled to improve the user experience for the client.

X = No labels (blank)
L = Custom labels

Use the online Philips Antumbra configurator to produce labelling documentation, to sign off on, and accompany your purchase order.

Pricing

When reviewing the Philips Dynalite price list, pricing Antumbra panels can be a little confusing.

  • All button configurations are the same price (i.e. 2/4/6 buttons).
  • All rim colours are the same price (when included with the panel).
  • Button finish pricing varies, between polycarbonate and metallic.
  • All Antumbra panels require a DACM communications modules, that is ordered as a separate product.
  • All panels should be labelled where possible – it provides the best user experience (but you can order unlabelled if you want).

The most popular and typical pricing configurations of a labelled polycarbonate and metallic panels are:

  • PAxBPA with labelled polycarbonate buttons (W/S/M) + DACM
  • PAxBPA with labelled metallic buttons (A/G/N/J/V/P) + DACM

Can’t commit to labelling?

It is quite common for some clients to order unlabelled Antumbra panels, and an additional labelled button set.

When ordering a button set, be sure to prepare configuration documentation using a PAxBSA product code, rather that a standard PAxBPA code.

Pricing this scenario could look something like this example:

  • PAxBPA with unlabelled polycarbonate buttons (W/S/M) + DACM
  • PAxBSA labelled polycarbonate button set

More functionality?

If 2,4, or 6 buttons is not enough, and you require more functionality, look at the Antumbra Display range, that I will feature in an upcoming ‘Getting to know’.

This series of articles focuses on products from the Philips Dynalite networked lighting control portfolio. Many industry professionals regard Philips Dynalite as being the world’s best lighting control system, that I have represented with Lightmoves for many years. SimonLakey

Getting to know: Philips Dynalite motorised blind control

Motorised blinds are often one of the most appreciated third-party products, by clients, to be controlled in a home, as the traditional alternate of having to manually open and close them is cumbersome.

There are a few typical ways of controlling motorised blinds with a Philips Dynalite system, using specific controllers:

  • DDRC810DT-GL SPDT Relay controller
  • DDMC802 Multipurpose modular controller + DGCM102 Motorised curtain module
  • DDNG485 – Configured as a Somfy integration device

DDRC810DT-GL

The Philips Dynalite DDRC810DT-GL is ideal for controlling bi-directional motors, such as curtain and blind motors. The voltage free changeover SPDT output relays are perfect for controlling bi-directional motors.

Whist being an eight channel relay, a single motor will require two channels, and will typically control four single motorised blinds.

Philips have a valuable guide for Blind, curtain and motor control with Dynalite relay controllers, that can be downloaded. 

The downloadable installation instructions provide clear instruction for wiring of the relay controller for motorised blinds.

Specification Sheet
Installation Instructions

DDMC802 + DGCM102

The Philips Dynalite DDMC802 provides up to eight configurable output channels, controlled by up to four interchangeable control modules. A selection of control modules is available for a variety of load types. Specifically, the DGCM102 curtain control module provides control of curtains, blinds and other motorised window treatments.

Although the DDMC802 is an eight channel controller, it needs to be populated with specific modules to be functional. It has four slots to be filled, with various modules requiring one or two slots. When used a blind controller, the DGCM102 requires a single slot, so can therefore control up to four blinds.

The downloadable installation instructions provide clear instruction on Page 3 for wiring of the multipurpose controller for motorised blinds.

Specification Sheet
Installation Instructions

DDNG485

The Philips Dynalite DDNG485 is a flexible network communications bridge designed for RS-485 networks. The DDNG485 can route DyNet to third-party systems such as audio-visual, Somfy blind controllers,  and building automation systems, providing an integrated approach to total building control and energy management.

The downloadable installation instructions doesn’t specifically provide blind control instructions, but Philips have a DyNet to Somfy gateway User Guide as a valuable resource for integrating Somfy RTS blinds, that can be downloaded from my shared Dropbox link.

If using the DDNG485 for blind integration, I recommend partnering with a reputable blind supplier who can assist with configuring their Somfy RTS controller, that will greatly help with your system. 

Specification Sheet
Installation Instructions

Let me know

I’m interested to know how you do motorised blinds, and what blind products and systems you have experience integrating with.

This series of articles focuses on products from the Philips Dynalite networked lighting control portfolio. Many industry professionals regard Philips Dynalite as being the world’s best lighting control system, that I have represented with Lightmoves for many years. SimonLakey

Getting to know: Philips Dynalite DDBC110 Signal dimmer controller

The Philips Dynalite DMBC110 is a luminaire mount multi-protocol control solution that provides intelligent networked control of individual lighting fixtures. The compact design enables mounting directly within the gear enclosure of many lighting fixtures.

  • Incorporates one relay output and one signal dimmer output – Provides dimming control of DALI, 1-10V and DSI compatible drivers and transformers.
  • Gear enclosure mounting – Compact design allows the device to be mounted directly within the gear enclosure of many light fittings.
  • Fully rated device – Robust relays provide reliable control of difficult lighting loads.
  • Inbuilt diagnostic functionality – Features Device Online/Offline status indication.

Applications

The DMBC110 is a flexible device that is suitable for a number of applications. 

Linear LED strip lights
With its compact form factor, the DMBC110 is a flexible device, that can control local linear LED strip lights that cannot be home run to a distribution board. The DMBC110 can be installed with the LED driver, and only requires a DyNet connection to be included on the Dynet daisy chain.

This series of articles focuses on products from the Philips Dynalite networked lighting control portfolio. Many industry professionals regard Philips Dynalite as being the world’s best lighting control system, that I have represented with Lightmoves for many years. SimonLakey

Getting to know: Philips Dynalite DDMC-GRMS Multifunction modular controller

Following a previous, getting to know the DDMC802, I introduce the DDMC-GRMS multipurpose modular room controller.

The Philips Dynalite DDMC-GRMS is a general room automation and energy management system. Allowing for a range of output modules, the compact unit delivers the ultimate in room comfort through seamless control of lighting, curtains and blinds, as well as limiting standby current consumption from electronic devices connected to power outlets.

  • One 16 A power relay – Enables a total energy management solution, reducing standby power consumption by switching power outlets.
  • Three switching channels – Provide additional on/off control of other lighting fixture types.
  • Five channel modular controller – Leading and trailing edge dimming modules, signal dimming modules and relay control modules available.
  • Two built-in motor directional relays – Provides control of motorized blinds for a full automation solution.
  • Pre-programmed – No programming required as the unit is supplied with complex functions such as ‘master on/off’, ‘room unoccupied’, ‘do not disturb’ or ‘make up room’ already configured. The device can be reconfigured to meet any project requirements. Alternatively, it can be programmed with System Builder, as you would a typical multipurpose modular controller.
  • Single box solution – Provides an economical total energy management solution.
  • Built-in sequential logic functionality – Allows intelligent responses to programmed triggers.

Buy multipurpose modular controller…
DDMC-GRMS Multipurpose modular controller

Add modules…
DDLM102 1x 2A Leading edge dimmer module
DDTM102 1x 2A Trailing edge dimmer module
DDBM101 1x 2A Ballast control module
DDRM104 1x 4A Relay module

Specification sheet
Installation instructions

Applications

There are many applications for the DDMC-GRMS. I have found that the most effective way of specifying the product is the understand its capabilities, and quantify the loads around it.

I was recently involved with the specification of a special needs community housing project that featured multiple single dwelling units. Each unit had simple living and kitchen spaces, single bedroom and bathroom; an ideal application for the DDMC-GRMS.

The DDMC-GRMS used five channels of trailing edge dimming, and three switched relay channels. An ethernet gateway, power supply, and a selection of Antumbra lighting control panels, and recessed multifunction sensors completed the specification.

1x DDMC-GRMS
5x DDTM102 Trailing edge dimmer modules
1x DDNP1501 Power supply
1x PDEG Ethernet gateway
4x PA6BPA-WA-L Antumbra button application modules
4x DACM Dynet communications modules
2x DUS360CR multifuction recessed sensor

This series of articles focuses on products from the Philips Dynalite networked lighting control portfolio. Many industry professionals regard Philips Dynalite as being the world’s best lighting control system, that I have represented with Lightmoves for many years. SimonLakey

Philips Dynalite Engineering Specification

Did you know that Philips Dynalite has a comprehensive engineering specification?

This specification is a valuable resource for specifiers; designers, and consultants to specify a Dynalite lighting control system, to accurately describe a networked lighting control system in project documentation.

Being a specification resource, the document doesn’t provide specific information on each and every product, but rather a functionality specification that separates Dynalite from other lighting control systems.

It covers almost every aspect for a Philips Dynalite specification, including:

  • System functionality
  • Load controllers
  • User interfaces
  • Networking and integration
  • Software
  • Monitoring

Some examples of the specification:

8.2 System Functionality > Occupancy Control (page 10)
Through sensor based occupancy detection, enable management of the artificial lighting level required at any given time for vacant and occupied areas. This feature shall be capable of functioning at the same time as light level detection, especially in areas that experience high levels of daylight i.e. adjacent to windows.

8.3.2 Light Level Control > Dimming (page 11)
The system must be capable of implementing dimming control of lighting from a flexible choice of networked user interfaces. This shall be achieved by a protocol (or signal) to a lamp driver (DALI addressable, DALI Broadcast, DSI, or 1-10V) or by power control of phase control dimmers.

8.3.5 Light Level Control > Colour Component and White Balance Control (page 12)
The system shall have provision to represent and control luminaires that incorporate multiple channels for the adjustment of color (RGB) or tunable white (warm white/cool white). When integrating White Balance control in a DALI network, only one DALI address shall be used for controlling both white balance and dimming level.

9.3.2 Power Dimming Controllers > Trailing Edge Power Dimming Controllers (page 17)
Trailing Edge, (TE) dimmers shall be used on unique lighting circuits that incorporate trailing edge compatible low voltage electronic transformers. Trailing edge dimmers shall use MOSFET transistors as the power-regulating device. All trailing edge dimmers shall incorporate electronic overvoltage protection, and electronic short circuit protection. Trailing edge dimmers shall be capable of sensing an inductive load, and automatically revert to switching only if an inductive load is connected.

9.4.1 Signal Dimming Controllers > Broadcast Signal Dimming Controllers (page 18)
Signal dimming shall be used to control luminaires with integral dimming control gear. Signal dimming controllers shall use commissioning software to select the output as 1-10V, DSI or DALI Broadcast. The controllers shall optionally incorporate an integral mains supply relay for each ballast control output circuit so that power can be removed from the lighting circuit when the ballast control channel is set to 0% output (off state). The relay shall have an appropriately rated capacity for typical lighting loads. Control systems that require an external DSI or DALI converter shall not be acceptable.

Feel free to download the Philips Dynalite Engineering Specification and distribute it to your design and consultant audience.

Let me know if I can be of further assistance helping you specify a lighting control system, that will differentiate it from others.

This series of articles focuses on products from the Philips Dynalite networked lighting control portfolio. Many industry professionals regard Philips Dynalite as being the world’s best lighting control system, that I have represented with Lightmoves for many years. SimonLakey

Getting to know: Philips Dynalite sensors

By definition, a ‘smart’ building is able to vary its state or action in response to varying situations. Philips Dynalite have a range of multifunction sensors that are an integral component for making a building ‘smart’.

Philips Dynalite sensors are fully networked devices that support multiple functions at the same time. This versatility and capability results in coordinated operation across the entire system, allowing every device on the network to respond to environmental changes and user requirements in real time.

All Dynalite sensors include motion and light level sensing to automatically detect occupancy and control lighting levels. These intelligent devices detect the slightest movement and are quick and easy to install, generating savings with minimum effort. Additionally, these sensors can communicate to the building’s HVAC system when rooms are unoccupied, cutting down on unnecessary heating and cooling from third-party systems.

Powerful tasking capabilities allow Dynalite sensors to modify their behavior between business hours and after-hours. Thanks to their network connectivity, they can coordinate multiple lighting groups in other areas when needed, such as lighting a path from an occupied workspace to the nearest exit at night.

This powerful combination of responsiveness and customisable functionality means that users experience safe, comfortable lighting wherever they are, often without ever needing to touch a control panel or interact directly with the system.

Sensor Range

Popular sensor in the Philips Dynalite range include:

DUS360CR

The Philips Dynalite DUS360CR is a recess mountable 360 degree multifunction sensor that combines motion detection (PIR), infrared remote control reception (IR) and ambient light level detection (PE) into one device in applications such as offices, lecture theaters and homes.

  • Motion detection feature – Detects the presence or absence of motion and adjusts lights accordingly.
  • Segmented click-up bezel – Surrounds the motion sensor element and enables a portion of the sensing field to be masked. This prevents nuisance detection from adjacent doorways or corridors.
  • Ambient light level regulation – In applications where it is critical to maintain precise light levels, the PE function reads ambient levels and adjusts artificial light accordingly.
  • Infrared receive capability – Manually adjust light levels using a hand-held remote control, via the inbuilt IR receive sensor of the DUS360CR.
  • Daylight harvesting mode – Delivers automatic energy savings.

Specification sheet
Installation instructions

DUS360CS

The Philips Dynalite DUS360CS is a surface mountable 360 degree multifunction sensor that combines motion detection (PIR), infrared remote control reception (IR) and ambient light level detection (PE) into one device in applications such as hotels, restaurants and homes.

  • Motion detection feature – Detects the presence or absence of motion and adjusts lights accordingly.
  • Segmented click-up bezel – Surrounds the motion sensor element and enables a portion of the sensing field to be masked. This prevents nuisance detection from adjacent doorways or corridors.
  • Ambient light level regulation – In applications where it is critical to maintain precise light levels, the PE function reads ambient levels and adjusts artificial light accordingly.
  • Infrared receive capability – Manually adjust light levels using a hand-held remote control, via the inbuilt IR receive sensor of the DUS360CS.
  • Daylight harvesting mode – Delivers automatic energy savings.

Specification sheet
Installation instructions

DUS90CS

The DUS90CS is wall or ceiling mountable multifunction sensor that combines motion detection (PIR), infrared remote control reception (IR) and ambient light level detection (PE) into one device for applications such as offices, lecture theaters and homes. Manufactured with an IP54 rating, the DUS90CS is resistant to dust and splashing, making it suitable for use in both indoor and sheltered outdoor areas.

  • Motion detection feature — Detects the presence or absence of motion and adjusts lights accordingly.
  • Ambient light level regulation — In applications where it is necessary to maintain even lighting, the PE function reads ambient levels and adjusts artificial light accordingly.
  • Infrared receive capability — Manually adjust light levels using a hand-held remote control, via the inbuilt IR receive sensor.
  • Daylight harvesting mode — Delivers automatic energy savings.
  • Multiple mounting options — The sensor has a 90 degree scan pattern with flexible angle adjustment and can be recessed or surface mounted on a wall or ceiling.
  • IP54 rating — Dust- and splash-resistant housing allows installation in a variety of indoor and outdoor applications.

Specification sheet
Installation instructions

More information

For more information about these sensors, and others in the Philips Dynalite range, check out the latest Philips Dynalite networked sensors brochure.

This wonderful brochure goes into quite a bit of basic detail about how various sensors technologies work:

  • PIR motion sensing
  • Ultrasonic motion sensing
  • Light level sensing
  • Sensor scan patterns
  • Configuration
  • Light level regulation
  • Connectivity

This series of articles focuses on products from the Philips Dynalite networked lighting control portfolio. Many industry professionals regard Philips Dynalite as being the world’s best lighting control system, that I have represented with Lightmoves for many years. SimonLakey

Getting to know: Philips Dynalite DDMC802 Multifunction modular controller

The Philips Dynalite DDMC802 provides up to eight configurable output channels, controlled by up to four interchangeable control modules. A selection of control modules is available for a variety of load types.

  • Single controller solution – Control a variety of load types from one device.
  • Four module bays – Accommodates any combination of up to four single modules or two double-size modules.
  • Flexible mounting solution – A DIN-rail mountable device, designed to be installed into the distribution board supplying power to the controlled circuit.
  • Leading edge phase control dimmer module (DGLM105/202/402): Suitable for use with incandescent lamps and some types of dimmable electronic transformers.
  • Trailing edge phase control dimmer module (DGTM104/202/402): Suitable for use with most types of dimmable electronic transformers.
  • Signal dimmer control module (DGBM200) Suitable for 1-10 V, DSI and DALI Broadcast control of digital drivers and transformers.
  • Relay control module (DGRM204): Suitable for controlling most types of switched loads.
  • Fan control module (DGFM102): 400 VA three-speed fan control.
  • Curtain control module (DGCM102): Provides control of curtains, blinds and other motorized window treatments.

Buy multipurpose modular controller…
DDMC802 Multipurpose modular controller

Add modules…
DGFM012 1x 2A Fan control module
DGCM102 1x 2A Curtain control module
DGRM204 2x 4A Replay module
DGBM200 2x Channel ballast module
DGLM105 1x 5A Leading edge dimmer module
DGLM202 2x 2A Leading edge dimmer module
DGLM402 4x 2A Leading edge dimmer module
DGTM104 1x 4A Trailing edge dimmer module
DGTM202 2x 2A Trailing edge dimmer module
DGTM402 4x 2A Trailing edge dimmer module

Specification sheet
Installation instructions

Applications

When this product is supplied, it needs to be configured with the appropriate modules, that need to be carefully installed.

With the top cover removed, the DDMC802 has four slots for installing modules into. Some modules plug into a single slot, and other require two slots. The installation instructions document illustrates the installation process well.

I have found that the most popular application for this product is as an 8x channel trailing edge, phase dimmer. For this application, the following products need to be ordered:

8 Channel TE phase dimmer
1x DDMC802
2x DGTM402

Another popular application, is to control variable sweep fans. For this application (to control a maximum of 4x sweep fans), the following products need to be ordered:

4 Channel variable sweep fan controller
1x DDMC802
4x DGFM102

The multipurpose modular controller is fantastic for home cinemas, demonstration suites, and small units, as they can be configured to control different loads; all from a single controller. 

This series of articles focuses on products from the Philips Dynalite networked lighting control portfolio. Many industry professionals regard Philips Dynalite as being the world’s best lighting control system, that I have represented with Lightmoves for many years. SimonLakey

Getting to know: Philips Dynalite DACM

The DACM (Dynalite Antumbra Communication Module) is a DyNet communication module that connects to any Antumbra user interface to a Philips Dynalite system. It is most often purchased with an Antumbra application module (e.g. PAxBPA, PATPA, PADPA).

  • Powered by DyNet – Does not require an external power supply.
  • Universally compatible – Works with any AntumbraButton, AntumbraTouch or AntumbraDisplay application module.
  • Onboard processor – Contains all logical and network functions and can be commissioned prior to installation.
  • Functions without application module – Can be installed, wired and tested without application module, avoiding fascia damage during ongoing construction.
  • Pre-configuration – Can store and recall up to 21 configurations using the DIP switch, streamlining the commissioning and installation process.

Update

You may start to notice that the DACM has been updated to a DACM V3, that now has a green label:

  • Original DACM: Black label
  • DACM V2: Blue label
  • DACM V3: Green label

Please upgrade your firmware version based on the device’s microprocessor: firmware version 2.xx for generation one microprocessors or firmware version 3.xx for generation two microprocessors.

For most applications, there will be no performance difference between the DACM V2 and DACM V3.

This series of articles focuses on products from the Philips Dynalite networked lighting control portfolio. Many industry professionals regard Philips Dynalite as being the world’s best lighting control system, that I have represented with Lightmoves for many years. SimonLakey

Getting to know: Philips Dynalite PDEG vs PDEB Network gateways

The Philips Dynalite product catalog features two ethernet products; the Ethernet Gateway (PDEG), and Ethernet Bridge (PDEB). Many may be familiar with the PDEG ethernet gateway, using it a time clock for scheduling, and wireless programming. Many may be unaware of the more recent addition to the product portfolio, the PDEB ethernet bridge. Let’s take a closer look at these two products, and how they can be used.

PDEG Philips Dynalite Ethernet Gateway

The Philips Dynalite PDEG provides a multipurpose Ethernet connection to a Philips lighting control system. It supports access to the lighting system via a dedicated Philips app as well as providing a web interface delivering access to the inbuilt timeclock and schedule editor functions. It provides bridging functionality between Ethernet backbone and the DyNet fieldbus devices.

  • Large storage capacity – The device stores large project files internally, which apps use to automatically configure their settings. This saves configuration time and ensures accuracy for phone and tablet control.
  • Built-in web server – Allows the user to edit and check system settings via the Network Hardware Checker and System Roll Call tools.
  • No technical skills needed – Inbuilt timeclock and schedule manager allow the user to manage operation and task scheduling without advanced technical knowledge.
  • Powerful custom task engine – Allows users or third-party systems to run macros, such as ‘After Hours’, ‘Shut Down’, ‘Welcome’ and more.
  • Advanced interoperability – Supports management of Philips Dynalite and Philips PoE fittings on a single system.

Practically, for most integrators, the PDEG can be used for the following:

More information
Specification sheet
Installation manual
Commissioning guide

PDEB Philips Dynalite Ethernet Bridge

The Philips Dynalite PDEB provides a cost-effective Ethernet connection to a Philips lighting control system. It provides bridging functionality between an Ethernet backbone and the DyNet fieldbus devices. The PDEB enables the implementation of a trunk and spur topology on large project sites, with the bridge providing a high-speed backbone coupled to many lower speed spurs.

  • Cost-effective – The device provides an economical way to connect the RS-485 DyNet network to an Ethernet network.
  • Internal controls – Programmable logic controller capable of comprehensive conditional and sequential logic and arithmetic function processing, packet filtering and DyNet to DyNet 2 translation.
  • Flexible mounting solution – DIN-rail mountable, designed to be installed into a distribution board or other electrical enclosure.

Practically, for most integrators, the PDEB can be used for the following:

  • Third-party system control integration
  • Ethernet bridge

More information
Specification sheet
Installation manual

Summary

Whilst most projects will incorporate a PDEG ethernet gateway for time clock and scheduling functionality, the PDEB ethernet bridge can be used as a more cost effective solution for integrating third-party control systems, or as a bridge for large systems.

This series of articles focuses on products from the Philips Dynalite networked lighting control portfolio. Many industry professionals regard Philips Dynalite as being the world’s best lighting control system, that I have represented with Lightmoves for many years. SimonLakey